Hello,

 

I have a problem with BMW X5 2001y Dash. It's the same like on the picture attached, but I think I killed the Dash, because I tried alot of things before I understand that the Dash got 35080. Actually the Dash is SW14 and Omega said that HW14 is with 93S56. I tried to read the eeprom like 93S56 with ISP adapter with no luck. Also I tried to give the dash some external power to see what's going on. At the end I found that picture where they said that the eeprom is 35080 and I think that I make a big mistake and killed the Dash before. Now I can read the M35080 with Omega with ISP Adapter, but I cannot erase the eeprom to write the new values, also when I put the Dash back on the car, it wont power up. Only the Speedometer going on 160km/h and that's all. No lights no lcds no power at all. Anyone know how I can erase and reprogram the eeprom 35080 in circuit (I don't want to try to get the arrows out and to remove the eeprom from the board)?

 

Thanks in advance

 

PS: I hope you guys don't mind that I write in English. I can read and understand Russian good, but I can not write in your language. Also google translate is not an option for me, because it's not working good.

Изменено 3 марта, 201312 г. пользователем julianstefanov

Should be removed from the panel 35080. Put a new one.

Any idea how to remove the arrows without damage the motors? They're magnetic field motors, and I didn't removed arrows from that kind of motors still.

 

Thanks for the answer Sergeii

To remove the arrows need a tool .....

I have found a way to remove the eeprom and now the dash is up and runing like a charm :)

Used omega to fill the eeprom with another dump, then changed the KM, then VIN and that's all.

 

Thanks!

 

PS: Btw Sergeii, I bought a tool for the arrows, but it's not for X5 and 5 Series. Anyway I have new tool now, will test it on some dash in the future :)

 

Edit: Topic can be closed

Изменено 5 марта, 201312 г. пользователем julianstefanov